Skip to content
November Hot Drops
00 Days
00 Hours
00 Mins
00 Secs

✔ Fast, Flexible Delivery

✔ Price Match Promise

✔ Pay easily with Klarna or PayPal

Mon-Fri: 9am-5:30pm | Sat: 9am-4pm
MENU
November HOT DROPS
EXCEPTIONAL FLOORING CONSIDERED PRICES
00 Days
00 Hours
00 Mins
00 Secs
EXPLORE THE OFFER
Home Search Contact
How to Fit Parquet Flooring: A Step-by-Step Guide

How to Fit Parquet Flooring: A Step-by-Step Guide

Parquet flooring is a stylish way to enhance your home with decorative patterns and natural wood character. From traditional herringbone designs to elegant geometric layouts, it can add warmth and sophistication to living rooms, bedrooms and other suitable spaces.

However, fitting parquet flooring requires careful preparation, accurate measurements and attention to detail. If you are wondering how to fit parquet flooring, this step-by-step guide will help you understand the process, the tools you need and the common mistakes to avoid.

What Is Parquet Flooring?

Parquet flooring consists of individual wood blocks or engineered wood pieces arranged in decorative patterns. Popular designs include herringbone, chevron, basketweave and Versailles.

Herringbone flooring features rectangular pieces arranged in a staggered zigzag pattern, while chevron flooring uses angled ends to create a continuous V-shaped design. Both styles can create an attractive focal point in a room.

Before installation, check whether your chosen parquet flooring is solid wood or engineered wood, as its construction can affect the fitting method and preparation requirements.

What Tools and Materials Do You Need?

Before you begin, gather the tools and materials required for your particular flooring product.

These may include:

  • Parquet flooring blocks or panels
  • Suitable flooring adhesive, if required
  • Tape measure
  • Pencil and straight edge
  • Spirit level or laser level
  • Chalk line
  • Notched trowel
  • Rubber mallet
  • Appropriate saw or cutting tool
  • Spacers
  • Suitable primer, if required
  • Flooring finish for unfinished parquet
  • Protective equipment

Always follow the flooring manufacturer's installation instructions to ensure you use compatible materials and tools.

Step 1: Prepare the Subfloor

Proper subfloor preparation is essential for a stable and attractive parquet floor. An unsuitable surface can cause movement, unevenness and problems with the flooring over time.

Before fitting, make sure the subfloor is:

  • Clean and free from dust, grease and debris
  • Dry and within the manufacturer's moisture limits
  • Flat and level within the specified tolerances
  • Structurally sound and stable
  • Free from loose materials and other defects

Repair uneven areas and remove any loose flooring or debris before continuing. If necessary, use a suitable levelling compound or primer recommended for your subfloor and adhesive system.

Never install parquet flooring over a damp or unstable surface without resolving the underlying issue first.

Step 2: Acclimatise the Flooring if Required

Wood can expand or contract in response to changes in temperature and humidity. Some parquet flooring products therefore require acclimatisation before installation.

Follow the manufacturer's instructions for storing the flooring, controlling room conditions and allowing it to acclimatise. Requirements vary depending on the product, so do not assume that every type needs the same period.

Make sure the room conditions are suitable before starting work.

Step 3: Plan the Parquet Flooring Layout

Planning the pattern is one of the most important stages when learning how to fit parquet flooring.

Start by measuring the room and identifying its centre or main visual axis. Use a chalk line or laser to mark accurate reference lines that will guide the installation.

Consider the following before laying the first piece:

  • The direction of the pattern
  • The position of doorways and adjoining rooms
  • The appearance of the pattern at the walls
  • The size of the cuts required around the edges
  • Any obstacles, such as fireplaces or fixed units

For herringbone parquet, carefully establish the starting line and angle. If the first pieces are not aligned correctly, the error can become increasingly noticeable across the room.

Dry-laying a small section, where appropriate for the product, can help you check the pattern before committing to the installation.

Step 4: Apply the Appropriate Adhesive

Many parquet flooring products are installed using a fully bonded adhesive system. Others may have different installation requirements, so always confirm the correct method for your flooring.

If adhesive is required, apply a suitable product using the recommended notched trowel. Work in manageable sections to prevent the adhesive from drying or becoming unsuitable before the flooring is positioned.

Follow the adhesive manufacturer's instructions regarding coverage, application, open time and working conditions.

Using the wrong adhesive or applying it incorrectly can affect the bond and the finished floor.

Step 5: Lay the First Pieces of Parquet

Begin at your planned starting point, following the reference lines you created earlier.

Position the first pieces carefully and check their alignment before continuing. For herringbone flooring, the first row is particularly important because it determines the direction and consistency of the entire pattern.

Press each piece into position according to the installation instructions. Keep the pattern consistent and avoid leaving unintended gaps between adjoining pieces.

Check the alignment regularly rather than waiting until several rows have been installed. Correcting small errors early can save time and help prevent an uneven finish.

Step 6: Continue Laying the Pattern

Once the initial section is correctly positioned, continue installing the parquet across the room.

During installation, regularly check:

  • The alignment of the pattern
  • The straightness of the rows
  • The consistency of the joints
  • The positioning of each piece
  • The adhesive application, where applicable

Work carefully around the room and keep checking against your reference lines. Even a small alignment error can affect the overall appearance of a geometric parquet design.

Step 7: Cut the Flooring Around the Edges

As you approach walls, door frames and other obstacles, you will usually need to cut some pieces to fit.

Measure each section carefully and use a suitable cutting tool. Plan the cuts so that the finished pattern looks balanced and the flooring fits neatly around fixed features.

Leave the required expansion gap around the perimeter and other locations specified by the manufacturer. The gap may be concealed with suitable skirting boards or finishing trims.

Pay particular attention to doorways and transitions between rooms to create a neat, consistent finish.

Step 8: Allow the Flooring to Set

If your parquet flooring is glued down, allow the adhesive to cure for the period specified by the manufacturer.

During this time, avoid unnecessary foot traffic, moving heavy furniture or cleaning the floor with water. Allowing the adhesive to cure properly helps the installation achieve the required bond.

Follow the instructions for any additional restrictions before using the room normally.

Step 9: Sand and Finish Unfinished Parquet Flooring

If you have chosen unfinished parquet flooring, sanding and finishing may be necessary after installation and adhesive curing.

Sanding helps create a more even surface before the chosen finish is applied. Depending on the desired appearance and product requirements, this may include a suitable wood flooring oil or lacquer.

Pre-finished parquet flooring generally does not require on-site sanding and finishing. Always check the product specifications before carrying out any additional treatment.

Common Mistakes to Avoid When Fitting Parquet Flooring

Even small mistakes can affect the appearance and performance of parquet flooring. Avoid these common problems during installation.

Skipping Subfloor Preparation

An uneven, damp or unstable subfloor can lead to installation problems. Check the surface carefully before beginning.

Starting Without a Layout Plan

An incorrectly positioned starting point can create uneven cuts and an unbalanced pattern around the room.

Misaligning the First Row

The first pieces determine the direction of the pattern. Measure carefully and check alignment before proceeding.

Using Unsuitable Adhesive

If your flooring requires adhesive, choose a product approved for the specific flooring and subfloor combination.

Forgetting Expansion Gaps

Wood flooring can move as environmental conditions change. Follow the manufacturer's guidance on expansion gaps and perimeter clearances.

Rushing the Installation

Parquet flooring requires patience and precision. Take time to check the pattern throughout the process rather than trying to complete the work too quickly.

Is It Better to Fit Parquet Flooring Yourself or Hire a Professional?

Some experienced DIY enthusiasts may be able to install parquet flooring themselves, particularly in straightforward rooms with suitable subfloors.

However, parquet installation can be more demanding than fitting standard plank flooring. Decorative patterns require accurate measurements, careful cutting and consistent alignment.

Hiring a professional flooring installer may be a sensible choice for complex room layouts, intricate patterns or expensive flooring materials. A professional can also help identify potential subfloor issues before installation begins.

How to Maintain Parquet Flooring After Installation

Once your parquet flooring is fitted, regular care can help preserve its appearance.

Follow these simple maintenance tips:

  • Sweep or vacuum regularly to remove dust and grit.
  • Use cleaning products suitable for your flooring's finish.
  • Wipe up spills promptly.
  • Avoid excessive water when cleaning wood flooring.
  • Place protective pads beneath furniture legs.
  • Use suitable entrance mats to reduce the amount of dirt brought indoors.
  • Follow the manufacturer's recommendations for cleaning and maintenance.

The correct maintenance routine will depend on the flooring material and its finish.

Find Quality Parquet Flooring at WoodFloors4U

Choosing the right flooring is an important part of creating a beautiful interior. Whether you prefer the timeless appeal of herringbone or the distinctive look of another parquet pattern, selecting a product that suits your room and installation requirements is essential.

WoodFloors4U offers a range of wood flooring options to help you explore different styles and finishes for your home.

Visit WoodFloors4U to discover the available flooring options and find inspiration for your next flooring project.

Frequently Asked Question

1. Is parquet flooring difficult to fit?

Parquet flooring requires careful planning and accurate alignment because the pieces form a geometric pattern. Herringbone and chevron designs can be particularly challenging, so professional installation may be helpful for complex layouts.

2. Can parquet flooring be installed over underfloor heating?

Some parquet flooring products are suitable for use with underfloor heating, but compatibility depends on the flooring construction and heating system. Check the manufacturer's instructions before installation.

3. Does parquet flooring need to be glued down?

Many parquet products require adhesive, but installation methods vary. Always check the product instructions to determine whether your flooring needs to be fully bonded or installed using another approved method.

4. Do you need an expansion gap when fitting parquet flooring?

Wood flooring generally needs sufficient space to accommodate natural movement caused by changes in temperature and humidity. Follow the manufacturer's instructions for the required expansion gaps.

5. Can parquet flooring be sanded and refinished?

Many unfinished and suitable finished wood parquet floors can be sanded and refinished, depending on their construction and remaining wear layer. Check the product specifications before sanding.