Treatex colour tones 2.5L

Treatex colour tones 2.5L

Home / Flooring Accessories / Treatex colour tones 2.5L

Treatex colour tones 2.5L

£78.99 Inc Vat

2.5L will cover approximately 50m² in one coat depending on the timber and method of application.

Wood doesn’t always match the other colours in our home. Don’t fret, change the colour of interior timbers with our range of colour tones. Treatex Hardwax Oil is available in the following colours




Treatex colour tones

Different timbers will take colours differently, we advise to do a sample first.

Please note that Treatex Colour Tones will not fully protect wooden surfaces on there own. Treatex Colour Tones must be sealed with two coats of Clear Hardwax Oil or Natural Hardwax Oil. For application instructions, click here.

Treatex colour tones

Engineered wood flooring consists of two or more layers of wood adhered together to form a plank. Typically, engineered wood flooring uses a thin layer (lamella) of a more expensive wood bonded to a core constructed from cheaper wood. The increased stability of engineered wood is achieved by running each layer at a 90° angle to the layer above. This stability makes it a universal product that can be installed over all types of subfloors above, below or on grade. Engineered wood is the most common type of wood flooring in Europe and has been growing in popularity in North America


Tongue-and-groove  One side and one end of the plank have a groove, the other side and end have a tongue (protruding wood along an edge’s center). The tongue and groove fit snugly together, thus joining or aligning the planks, and are not visible once joined. Treatex colour tones Tongue-and-groove flooring can be installed by glue-down (both engineered and solid), floating (engineered only), or nail-down (both solid and engineered).


Floor finishes

Brushed and oiled – Steel brushes are used in the direction of the grain which opens up the surface of the wood and removes splinters. The wood is then oiled.


Oil – Oiled floors have existed for several thousand years and is the most common floor finish used globally. Oils used for floor finishing are natural drying oils of vegetable origin that are not to be confused with petroleum based oils and contain no VOCs. Pre-finished oil floors can be UV cured.

Lacquered – Lacquered floors tend to be more durable and resilient to scratching, the lacquer provides a flat and smooth finish to the wood flooring.


Please see the technical datasheet for more detailed information on the product.


    There are no reviews yet.

Leave a Reply

Your email address will not be published. Required fields are marked *

Your review must be at least 50 characters.