Products
Iceberg grey oak light brushed and oiled wood flooring *job lot 7.58m2*

Iceberg grey oak light brushed and oiled wood flooring *job lot 7.58m2*

Home / Specials / Iceberg grey oak light brushed and oiled wood flooring *job lot 7.58m2*

Iceberg grey oak light brushed and oiled wood flooring *job lot 7.58m2*

£333.44 Inc Vat

Out of stock

Iceberg grey oak not only does it promote its elegance and natural texture through a lightly brushed finish, but the selected staining process gives it the most bespoke look achievable.

Plank Width 190mm  Corporate-Logo
Plank Length Fixed Lengths 1.9m
Thickness 3/14mm
Finish Iceberg Grey, Lightly Brushed & UV Oiled
Specie Oak
Grade Classic
Construction Engineered Plank, Mirco-Bevelled Edges
Profile Tongue & Groove
Warranty 20 years (Residential)
Underfloor Heating Yes Suitable

Iceberg grey oak

Engineered wood flooring consists of two or more layers of wood adhered together to form a plank. Typically, engineered wood flooring uses a thin layer (lamella) of a more expensive wood bonded to a core constructed from cheaper wood. The increased stability of engineered wood is achieved by running each layer at a 90° angle to the layer above. This stability makes it a universal product that can be installed over all types of subfloors above, below or on grade. Engineered wood is the most common type of wood flooring in Europe and has been growing in popularity in North America

 

Tongue-and-groove  One side and one end of the plank have a groove, the other side and end have a tongue (protruding wood along an edge’s center). The tongue and groove fit snugly together, thus joining or aligning the planks, and are not visible once joined. Iceberg grey oak tongue-and-groove flooring can be installed by glue-down (both engineered and solid), floating (engineered only), or nail-down (both solid and engineered).

Iceberg grey oak

Floor finishes

Brushed and oiled – Steel brushes are used in the direction of the grain which opens up the surface of the wood and removes splinters. The wood is then oiled.

 

Oil – Oiled floors have existed for several thousand years and is the most common floor finish used globally. Oils used for floor finishing are natural drying oils of vegetable origin that are not to be confused with petroleum based oils and contain no VOCs. Pre-finished oil floors can be UV cured.

Lacquered – Lacquered floors tend to be more durable and resilient to scratching, the lacquer provides a flat and smooth finish to the wood flooring.

 

In line with industry Standard packs may contain one split starter plank to assist with the stagger.

Reviews

    There are no reviews yet.

Leave a Reply

Your email address will not be published. Required fields are marked *

Your review must be at least 50 characters.